Walter Crane Flora’sTrain tile Cornflower


Lovely Arts And Crafts / Art Nouveau Style Printed Decorative Tile Walter Crane  from Flora’s Train

SKU: WC Cornflower Categories: , , Tags: ,

These printed tiles are handcrafted and can be supplied in any quantity you may need. You may purchase the tile as seen, with the options listed or if you require any adaptation (non standard sizes, change of colours etc) please contact us.

All our tiles are flat printed not Relief Moulded or Tubelined

Porcelain tiles (our most hardwearing tiles)

Fired after printing 2 to 3 week lead time

  • Available in 3 metric sizes, 10, 15, and 20cm square x 6.5mm thick
  • Will fit with plain metric ceramic or porcelain tiles from almost any supplier of plain tiles
  • are resistant to:
    • Extreme Climates (will not crack)
    • UV-Rays (guaranteed not to fade)
    • Graffiti (can be removed)
    • Scratching (under normal conditions of use, does not scratch)
    • Wear (suitable for high traffic areas)
    • Chemicals (will not harm surface or image)
    • High temperature ( up to 1292 Β°F, 700 Β°C) TILE INFORMATION

Solid fuel ceramic tiles

Fired after printing, 2 to 3 week lead time

  • Available in imperial 6 inch square (152mm ) x 7mm thick size
  • Suitable for use in cast iron inserts, hearths and fireplace chambers
  • Are heat and scratch resistant
  • Decorative ceramic tiles

Glazed coated ceramic tiles

1 week lead time (or less)

  • Available in 3 sizes
    • 108mm (4.25 inces) square x 5mm thick
    • 152mm (6 inches) square x 5mm thick
    • 200mm (just under 8 inches square) x 7mm thick

These tiles require special care – click here for instructions

Solid fuel and porcelain tiles

  • Can be fixed with any proprietary tile adhesive and grout

Glazed coated ceramic tiles

These require special treatment as below

  • Always use an un-sanded grout. Coated printed tiles are not scratchproof.
  • Do not grout the entire surface, just the joints. Wipe carefully with a soft cloth. Do not rub.
  • Clean as soon as possible with a mild solution of half a cap-full of Windolene or similar glass cleaner and a soft cloth.
  • T-shirt material is recommended as your soft cloth.
  • Apply grout sealer to the joint after 30 days, following the manufacturer’s directions.
  • Rinse and clean with a soft cloth
  • EXTRA CARE must be taken when fitting into cast iron fireplaces so as to ensure that the tile surface is not scratched by any sharp surface on the back of the cast

Solid fuel and porcelain tiles

  • Can be cleaned with any regular household bathroom/kitchen cleaner

Glazed coated ceramic tiles

These require special cleaning as below

  • The use of multi-purpose household cleaners is not recommended. It is not necessary to use any type of detergent. Detergent leaves a film that will dull the appearance of the tile. In the case of tile with a high-gloss finish, one cap-full of Windolene or similar glass cleaner can be added to one quart of warm water to remove any water streaks.
  • For kitchen backsplashes, clean often after cooking to prevent dirt build up. Do not use commercial tile cleaners, commercial fungicides, chlorine bleach, abrasive cleansers, detergent, ammonia or petroleum or animal fat-based cleaners. Read all cleansing product directions prior to use.
  • Do not use acids of any type (hydrofluoric or muriatic) on your tile or grout.
  • Do not use steel wool, coloured cleansing agents or scouring pads.
  • Do not wax your tile. Coated printed tiles are durable, with proper care and maintenance.
  • Do not use tiles outdoors or in fountains, swimming pools or spas.
  • If tiles are to be used in your shower they will require frequent periodic cleaning in order to remove soap scum, hard water deposits and body oil.